Cisco CATALYST 2960 Hardware Installation Guide

viii
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Preface
The safety warnings for this product are translated into several languages in the Regulatory Compliance
and Safety Information for the Catalyst 2960 Switch guide. The EMC regulatory statements are also
included in that guide.
Related Documentation
These documents provide complete information about the switch and are available from this
Cisco.com site:
http://www.cisco.com/en/US/products/ps6406/tsd_products_support_series_home.html
• Release Notes for the Catalyst 3750, 3560, 2970, and 2960 Switches
Note Before installing, configuring, or upgrading the switch, refer to the release notes on
Cisco.com for the latest information.
• Catalyst 2960 Switch Software Configuration Guide
• Catalyst 2960 Switch Command Reference
• Catalyst 3750, 3560, 3550, 2970, and 2960 Switch System Message Guide
• Device manager online help (available on the switch)
• Cisco Network Assistant online help (available on the switch)
• Catalyst 2960 Switches Getting Started Guide (8-Port Switches)
• Catalyst 2960 Switch Getting Started Guide. This guide is for the 24- and 48-port switches and
provides information in these languages: English, Chinese (Simplified), French, German, Italian,
Japanese, and Spanish
• Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
For information about related products, see these documents on Cisco.com:
• Getting Started with Cisco Network Assistant
• Release Notes for Cisco Network Assistant
• Cisco Small Form-Factor Pluggable Modules Installation Notes
• Cisco CWDM GBIC and CWDM SFP Installation Note
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this
device.
Statement 1071
SAVE THESE INSTRUCTIONS

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)