Cisco CATALYST 2960 - Page 41

2-9
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Chapter 2 Switch Installation (24- and 48-Port Switches)
Installing the Switch
Figure 2-5 Attaching Brackets for 24-Inch Racks to a Catalyst 2960 Switch, Rear Panel Forward
Figure 2-6 Attaching Brackets for 19-Inch Telco Racks to a Catalyst 2960 Switch
Figure 2-7 Attaching Brackets for 24-Inch Telco Racks to a Catalyst 2960 Switch
1 Phillips flat-head screws
1
137076
1 Phillips flat-head screws
1X
11X
1
204616
1 Phillips flat-head screws
1X
11X
204617
1