Cisco CATALYST 2960 Hardware Installation Guide

Contents
vi
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Console Port B-4
Cable and Adapter Specifications B-4
SFP Module Cable Specifications B-4
Two Twisted-Pair Cable Pinouts B-6
Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports B-6
Crossover Cable and Adapter Pinouts B-7
Identifying a Crossover Cable B-7
Adapter Pinouts B-8
APPENDIX C Configuring the Switch with the CLI-Based Setup Program C-1
Accessing the CLI C-1
Accessing the CLI Through Express Setup C-1
Accessing the CLI Through the Console Port C-2
Connecting to the Console Port C-3
Starting the Terminal Emulation Software C-3
Connecting to a Power Source C-4
Entering the Initial Configuration Information C-4
IP Settings C-5
Completing the Setup Program C-5
I NDEX

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)