Cisco CATALYST 2960 - CHAPTER 3; Assigning the Switch IP Address and Default Gateway

A-5
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Appendix A Technical Specifications
Table A-8 Catalyst 2960-48PST-S, 2960-24PC-S, and 2960-24LC-S Switch Specifications
Power Requirements
AC input voltage 100 to 240 VAC (autoranging)
8 to 4 A, 50 to 60 Hz (Catalyst 2960-24PC-S)
3 to 1.5 A, 50 to 60 Hz (Catalyst 2960-24LC-S)
5 to 2 A, 50 to 60 Hz (Catalyst 2960-48PST-S)
DC input voltage for
RPS 2300
+ 12 V @11.25 A, –48 V @ 7.8 A (Catalyst 2960-24PC-S)
+ 12 V @ 8.3 A, –48 V @ 2.7 A (Catalyst 2960-24LC-S)
+12 V @ 4 A, –48 V @ 7.8 A (Catalyst 2960-48PST-S)
Power consumption
1
1. The power consumption values are for the switch input power.
100 W, 341 BTUs per hour (Catalyst 2960-24PC-S)
51 W, 174 BTUs per hour (Catalyst 2960-24LC-S)
483 W, 1647 BTUs per hour (Catalyst 2960-48PST-S)
Power rating 0.470 KVA (Catalyst 2960-24PC-S)
0.175 KVA (Catalyst 2960-24LC-S)
0.5 KVA (Catalyst 2960-48PST-S)
Power over Ethernet
15.4 W-per-port maximum, 370-W switch maximum (Catalyst 2960-48PST-S and 2960-24PC-S
switches). 15.4 W-per-port maximum, 124-W switch maximum (Catalyst 2960-24LC-S).
Physical Dimensions
Weight 12 lb (5.44 kg) (Catalyst 2960-24PC-S)
10 lb (4.54 kg) (Catalyst 2960-24LC-S)
12 lb (5.44 kg) (Catalyst 2960-48PST-S)
Dimensions (H x W x D) 1.73 x 13 x 17.5 in. (4.39 x 33.02 x 44.45 cm)