Index
IN-27
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
monitoring (continued)
VMPS
12-33
VTP 13-16
MSDP
benefits of
45-3
clearing MSDP connections and statistics 45-19
controlling source information
forwarded by switch
45-12
originated by switch 45-9
received by switch 45-14
default configuration 45-4
dense-mode regions
sending SA messages to
45-17
specifying the originating address 45-18
filtering
incoming SA messages
45-14
SA messages to a peer 45-12
SA requests from a peer 45-11
join latency, defined 45-6
meshed groups
configuring
45-16
defined 45-16
originating address, changing 45-18
overview 45-1
peer-RPF flooding 45-2
peers
configuring a default
45-4
monitoring 45-19
peering relationship, overview 45-1
requesting source information from 45-8
shutting down 45-16
source-active messages
caching
45-6
clearing cache entries 45-19
defined 45-2
filtering from a peer 45-11
filtering incoming 45-14
MSDP (continued)
source-active messages (continued)
filtering to a peer
45-12
limiting data with TTL 45-14
monitoring 45-19
restricting advertised sources 45-9
support for 1-12
MSTP
boundary ports
configuration guidelines
18-16
described 18-6
BPDU filtering
described
19-3
enabling 19-14
BPDU guard
described
19-2
enabling 19-13
CIST, described 18-3
CIST regional root 18-3
CIST root 18-5
configuration guidelines 18-15, 19-12
configuring
forward-delay time
18-23
hello time 18-22
link type for rapid convergence 18-24
maximum aging time 18-23
maximum hop count 18-24
MST region 18-16
neighbor type 18-25
path cost 18-21
port priority 18-19
root switch 18-17
secondary root switch 18-19
switch priority 18-21
CST
defined
18-3
operations between regions 18-4
default configuration 18-15
default optional feature configuration 19-12
To Next Page
Loading...
