Cisco Catalyst 3120 - Page 1198

Index
IN-28
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
MSTP (continued)
displaying status
18-26
enabling the mode 18-16
EtherChannel guard
described
19-10
enabling 19-17
extended system ID
effects on root switch
18-17
effects on secondary root switch 18-19
unexpected behavior 18-18
IEEE 802.1s
implementation
18-6
port role naming change 18-7
terminology 18-5
instances supported 17-10
interface state, blocking to forwarding 19-2
interoperability and compatibility among
modes
17-11
interoperability with IEEE 802.1D
described
18-9
restarting migration process 18-25
IST
defined
18-3
master 18-3
operations within a region 18-3
loop guard
described
19-11
enabling 19-18
mapping VLANs to MST instance 18-16
MST region
CIST
18-3
configuring 18-16
described 18-2
hop-count mechanism 18-5
IST 18-3
supported spanning-tree instances 18-2
optional features supported 1-7
overview 18-2
MSTP (continued)
Port Fast
described
19-2
enabling 19-12
preventing root switch selection 19-10
root guard
described
19-10
enabling 19-18
root switch
configuring
18-18
effects of extended system ID 18-17
unexpected behavior 18-18
shutdown Port Fast-enabled port 19-2
stack changes, effects of 18-8
status, displaying 18-26
MTU
system
10-23
system jumbo 10-23
system routing 10-23
multicast groups
Immediate Leave
23-6
joining 23-3
leaving 23-5
static joins 23-10, 24-8
multicast packets
ACLs on
34-39
blocking 25-7
multicast router interfaces, monitoring 23-17, 24-12
multicast router ports, adding 23-10, 24-8
Multicast Source Discovery Protocol
See MSDP
multicast storm
25-1
multicast storm-control command 25-4
multicast VLAN 23-18
Multicast VLAN Registration
See MVR
multidomain authentication
See MDA
multioperations scheduling, IP SLAs
41-5