Cisco Catalyst 3120

Contents
xxi
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Setting the Maximum Number of IGMP Groups 23-27
Configuring the IGMP Throttling Action 23-27
Displaying IGMP Filtering and Throttling Configuration 23-29
CHAPTER 24 Configuring IPv6 MLD Snooping 24-1
Understanding MLD Snooping 24-1
MLD Messages 24-3
MLD Queries 24-3
Multicast Client Aging Robustness 24-3
Multicast Router Discovery 24-4
MLD Reports 24-4
MLD Done Messages and Immediate-Leave 24-4
Topology Change Notification Processing 24-5
MLD Snooping in Switch Stacks 24-5
Configuring IPv6 MLD Snooping 24-5
Default MLD Snooping Configuration 24-6
MLD Snooping Configuration Guidelines 24-6
Enabling or Disabling MLD Snooping 24-7
Configuring a Static Multicast Group 24-8
Configuring a Multicast Router Port 24-8
Enabling MLD Immediate Leave 24-9
Configuring MLD Snooping Queries 24-10
Disabling MLD Listener Message Suppression 24-11
Displaying MLD Snooping Information 24-11
CHAPTER 25 Configuring Port-Based Traffic Control 25-1
Configuring Storm Control 25-1
Understanding Storm Control 25-1
Default Storm Control Configuration 25-3
Configuring Storm Control and Threshold Levels 25-3
Configuring Protected Ports 25-5
Default Protected Port Configuration 25-5
Protected Port Configuration Guidelines 25-6
Configuring a Protected Port 25-6
Configuring Port Blocking 25-6
Default Port Blocking Configuration 25-7
Blocking Flooded Traffic on an Interface 25-7