Cisco Catalyst 3120

Contents
iv
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Changing the Command History Buffer Size 2-6
Recalling Commands 2-6
Disabling the Command History Feature 2-7
Using Editing Features 2-7
Enabling and Disabling Editing Features 2-7
Editing Commands through Keystrokes 2-8
Editing Command Lines that Wrap 2-9
Searching and Filtering Output of show and more Commands 2-10
Accessing the CLI 2-10
Accessing the CLI through a Console Connection or through Telnet 2-11
CHAPTER 3 Assigning the Switch IP Address and Default Gateway 3-1
Understanding the Boot Process 3-1
Assigning Switch Information 3-2
Default Switch Information 3-3
Understanding DHCP-Based Autoconfiguration 3-3
DHCP Client Request Process 3-4
Configuring DHCP-Based Autoconfiguration 3-5
DHCP Server Configuration Guidelines 3-5
Configuring the TFTP Server 3-6
Configuring the DNS 3-6
Configuring the Relay Device 3-7
Obtaining Configuration Files 3-7
Example Configuration 3-8
Manually Assigning IP Information 3-10
Checking and Saving the Running Configuration 3-11
Modifying the Startup Configuration 3-12
Default Boot Configuration 3-12
Automatically Downloading a Configuration File 3-12
Specifying the Filename to Read and Write the System Configuration 3-13
Booting Manually 3-13
Booting a Specific Software Image 3-14
Controlling Environment Variables 3-15
Scheduling a Reload of the Software Image 3-17
Configuring a Scheduled Reload 3-17
Displaying Scheduled Reload Information 3-18