Cisco Catalyst 3120

Contents
ix
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Configuring SSH 7-39
Configuration Guidelines 7-39
Setting Up the Switch to Run SSH 7-40
Configuring the SSH Server 7-41
Displaying the SSH Configuration and Status 7-42
Configuring the Switch for Secure Socket Layer HTTP 7-42
Understanding Secure HTTP Servers and Clients 7-42
Certificate Authority Trustpoints 7-43
CipherSuites 7-44
Configuring Secure HTTP Servers and Clients 7-45
Default SSL Configuration 7-45
SSL Configuration Guidelines 7-45
Configuring a CA Trustpoint 7-45
Configuring the Secure HTTP Server 7-46
Configuring the Secure HTTP Client 7-48
Displaying Secure HTTP Server and Client Status 7-49
Configuring the Switch for Secure Copy Protocol 7-49
Information About Secure Copy 7-49
CHAPTER 8 Configuring SDM Templates 8-1
Understanding the SDM Templates 8-1
Dual IPv4 and IPv6 SDM Templates 8-2
SDM Templates and Switch Stacks 8-3
Configuring the Switch SDM Template 8-4
Default SDM Template 8-4
SDM Template Configuration Guidelines 8-4
Setting the SDM Template 8-5
Displaying the SDM Templates 8-6
CHAPTER 9 Configuring IEEE 802.1x Port-Based Authentication 9-1
Understanding IEEE 802.1x Port-Based Authentication 9-1
Device Roles 9-2
Authentication Process 9-3
Authentication Initiation and Message Exchange 9-5
Ports in Authorized and Unauthorized States 9-7
IEEE 802.1x Authentication and Switch Stacks 9-7
IEEE 802.1x Host Mode 9-8
IEEE 802.1x Accounting 9-9
IEEE 802.1x Accounting Attribute-Value Pairs 9-9