Cisco GS7000 - Cleaning; Consumable Materials; Procedure

Preventative Maintenance
OL-29936-01 97
What to Inspect
How to Inspect
Indicators
Inspect for:

cracked or missing lenses
Wiring and cables
Inspect for:

cuts, nicks, burns, or abrasions

exposed bare conductors

sharp bends

pinched or damaged wires

broken or loose lacing, tie wraps, or clamps
Cleaning
Clean exterior surfaces of the equipment at least annually.
Consumable Materials
Use the materials listed below (or equivalent) when cleaning the equipment.
Item
Specification
Isopropyl alcohol
TT-I-735
Cheesecloth
CC-C-440
Spray-type contact cleaner
(none)
Procedure
Clean the equipment as described below.
1 Use a small paintbrush to brush dust from connectors.
2 Wipe surfaces dry with clean, dry cheesecloth.
3 Clean exterior surfaces with clean cheesecloth moistened with isopropyl alcohol
or general-purpose detergent. Do not let alcohol or detergent get inside
equipment or connectors.