Tools and Test Equipment
Required Tools and Test Equipment
Tools and test equipment required for setup are listed below. Equivalent items
may be substituted. Ensure test equipment is calibrated and in good working
order.
Fluke Model 77 (or equivalent) true-rms digital voltmeter (DVM) with 0.001
resolution.
Signal generator capable of generating carriers at 55.25 MHz and 745.25 MHz
“F” barrel adapter - 1 GHz
Field strength meter capable of measuring up to 1002 MHz
Field sweep receiver/transmitter with a minimum bandwidth of 900 MHz
EXFO FOT 22AX optical power meter with adapters
Fiber optic jumper to test transmitter optical output power
Glendale Technologies optical eye protection blocking 900–1600 nm light
To Next Page
Loading...
