Cisco GS7000 - Procedure

Chapter 2 Installation
34 OL-29936-01
Procedure
Install fibers as described below.
WARNING:
Laser light hazard. The laser light source on this product emits
invisible laser radiation. Avoid direct exposure. Never look into the
end of an optical fiber or connector. Failure to observe this warning
can result in eye damage or blindness.
 Do not apply power to this product if the fiber is unmated or unterminated.
 Do not stare into an unmated fiber or at any mirror-like surface that could reflect
light that is emitted from an unterminated fiber.
 Do not view an activated fiber with optical instruments.