Cisco GS7000 - Theory of Operation

Tools and Test Equipment
OL-29936-01 13
Fastener
Torque Specification
Illustration
Seizure nut
2 to 5 ft-lbs
(2.7 to 6.8 Nm)
RF cable connector*
Per manufacturer
instructions
Fiber optic cable connector
20 to 25 ft-lbs
(27.1 to 33.9 Nm)
Note: The typical insertion force required for RF connectors and RF terminators is
20-30 lbsf. However, in some field situations the required insertion force can be
higher. RF Connector/Terminators used should be able to withstand at least 80
pounds of insertion force without damage to the center pin.