Cisco RV042G Administration Guide

Cisco ProtectLink Web
Getting Started with Cisco ProtectLink Web
Cisco Small Business RV0xx Series Routers Administration Guide 114
8
Choose the appropriate option:
• Learn more about and request Free Trial for Cisco ProtectLink: Click this
link to open the Cisco ProtectLink Security Solutions page on Cisco.com.
You can read product information and get a 30-day trial for your RV router.
• Register ProtectLink services and obtain an Activation Code (AC): Click
this link if you purchased the product and are ready to register it. When the
registration page appears, follow the on-screen instructions to enter your
Registration Key and provide the required information. Close the web page
when you complete this process. The activation code will appear on the
screen and will be sent to the email address that you provided.
• Use the Activation Code (AC) to activate ProtectLink services: Click this
link if you registered the product and received an activation code. When the
activation page appears, enter your activation code and follow the on-
screen instructions to proceed. Close the web page when you complete
this process. Refresh the web browser, and now the ProtectLink Web
features are available on your router. The Global Settings page appears.
NOTE If you replace one router with another router that supports this service, you can use
the Use the Activation Code link to transfer your license for the ProtectLink service
to the new router.

Cisco RV042G Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	6
Routing protocols	IP, RIP-1, RIP-2
Supported network protocols	PPTP, L2TP, IPSec, PPPoE, DHCP
VPN support	PPTP, Layer 2 Tunneling Protocol (L2TP), IPsec, Dead peer detection (DPD), Internet Key Exchange (IKE), split DNS, VPN backup
Firewall security	Stateful packet inspection (SPI) firewall
Security algorithms	3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, HTTPS, IPSEC
VPN tunnels quantity	50
Authentication method	SHA-1, MD5
MAC address filtering	-
Certification	FCC Class B, CE Class B, UL, cUL, CB
Input current	1 A
Output voltage	12 V
Storage temperature (T-T)	0 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Product color	Black
Rack mounting	No

Weight and Dimensions

Depth	200 mm
Width	130 mm
Height	38.5 mm
Weight	600 g