3
Cisco Small Business RV0xx Series Routers Administration Guide 26
Setup
Use the Setup module to set up the basic functions of the router. Refer to these
topics:
• Setting Up the Network, page 27
• DMZ Setting, page 32
• Changing the Administrator Username and Password, page 40
• Setting the System Time, page 42
• Setting Up a DMZ Host, page 43
• Setting Up Port Forwarding and Port Triggering, page 44
• Setting Up Universal Plug and Play (UPnP), page 48
• Setting Up One-to-One NAT, page 51
• Cloning a MAC Address for the Router, page 53
• Assigning a Dynamic DNS Host Name to a WAN Interface, page 55
• Setting Up Advanced Routing, page 57
• IPv6 Transition, page 61