EasyManuals Logo
Home>Cisco>Network Router>RV042G

Cisco RV042G Administration Guide

Cisco RV042G
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Setup
Changing the Administrator Username and Password
Cisco Small Business RV0xx Series Routers Administration Guide 41
3
Confirm New Username: To confirm, re-enter the new username, exactly
as shown in the previous field.
New Password: Enter a new password for the router. You can include
alphanumeric characters and symbols, but no spaces.
Confirm New Password: To confirm, re-enter the new password, exactly as
shown in the previous field. An error message appears if the passwords do
not match.
Minimum Password Complexity: Check the Enable box if you want to
enforce password complexity and enable the Password Strength Meter.
This option is enabled by default and is recommended.
When Minimum Password Complexity is enabled, the password must meet
the requirements listed below. Your entries are validated when you click the
Save button.
- Includes at least 8 characters.
- Is not the same as the username.
- Is not the same as the current password.
- Contains characters from at least 3 of the following 4 categories:
uppercase letters, lowercase letters, numbers, and special characters
available on a standard keyboard.
Password Strength Meter: If you enable Minimum Password Complexity,
the Password Strength Meter indicates the password strength, based on
the complexity rules. As you enter a password, colored bars appear. The
scale goes from red (unacceptable) to yellow (acceptable) to green (strong).
Password Aging Enforcement: Choose Disable if you do not want the
password to expire. Choose Change the password after if you want the
password to expire after the specified number of Days (default 180).

Table of Contents

Other manuals for Cisco RV042G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV042G and is the answer not in the manual?

Cisco RV042G Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports6
Routing protocolsIP, RIP-1, RIP-2
Supported network protocolsPPTP, L2TP, IPSec, PPPoE, DHCP
VPN supportPPTP, Layer 2 Tunneling Protocol (L2TP), IPsec, Dead peer detection (DPD), Internet Key Exchange (IKE), split DNS, VPN backup
Firewall securityStateful packet inspection (SPI) firewall
Security algorithms3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, HTTPS, IPSEC
VPN tunnels quantity50
Authentication methodSHA-1, MD5
MAC address filtering-
CertificationFCC Class B, CE Class B, UL, cUL, CB
Input current1 A
Output voltage12 V
Storage temperature (T-T)0 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Rack mountingNo
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width130 mm
Height38.5 mm
Weight600 g

Related product manuals