17
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe
and Israel only.
Figure 6: PPTP
PPTP Settings
IP Address
This is the Router’s IP address, when seen from the WAN, or the Internet.
Your ISP will provide you with the IP Address you need to specify here.
Subnet Mask
This is the Router’s Subnet Mask. Your ISP will provide you the Subnet
Mask and your IP address.
Default
Gateway
Your ISP will provide you with the Default Gateway IP Address.
PPTP Server
Enter the IP address of the PPTP server.
Username
Enter the User Name provided by your ISP.
Password
Enter the Password provided by your ISP.
Connect on
Demand
You can configure the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time). If your
Internet connection has been terminated due to inactivity, Connect on
Demand enables the Router to automatically re-establish your connection
as soon as you attempt to access the Internet again. If you wish to activate
Connect on Demand, click the Connect on Demand option and enter the
number of minutes you want to have elapsed before your Internet connec-
To Next Page
Loading...
Need help?
General
