Cisco SG200 Series User Manual

Getting Started
Quick Start Device Configuration
Cisco Small Business SG200 Series 8-port Smart Switch 11
1
Quick Start Device Configuration
To simplify device configuration through quick navigation, the Getting Started
page provides links to the most commonly-used pages.
Links on the Getting Started Page
Category Link Name (on the Page) Linked Page
Initial Setup Change Device IP Address IPv4 Interface
Create VLAN Create VLAN
Configure Port Settings Port Settings
Device
Status
System Summary System Summary
Port Statistics Interface
RMON Statistics RMON Statistics
View Log RAM Memory
Quick
Access
Change Device Password User Accounts
Upgrade Device Software Upgrade/Backup Firmware/
Language
Backup Device
Configuration
Download/Backup Configuration/
Log
Configure QoS QoS Properties
Configure Port Mirroring Port Mirroring

Cisco SG200 Series Specifications

General

Model	SG200 Series
Layer	Layer 2
Type	Smart Switch
Port Type	Gigabit Ethernet
Form Factor	Desktop or Rack-mountable
Management	SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security	Yes
MAC Address Table	8K
Jumbo Frame Support	Yes
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	10% to 90% non-condensing
Power Supply	Internal
Ports	8
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps