Cisco SG200 Series User Manual

3
Cisco Small Business SG200 Series 8-port Smart Switch 32
Administration
This chapter describes how to configure global system settings and perform
diagnostics.
It contains the following topics.
• Configuring System Settings
• Management Interface
• Managing User Accounts
• Configuring the Idle Session Timeouts
• Login Sessions
• Login History
• Time Settings
• System Logs
• File Management
• Rebooting the Switch
• Pinging Hosts
• Configuring Control Packet Forwarding
• Diagnostics
• Enabling Bonjour
• LLDP-MED
• Configuring DHCP Client Vendor Options

Cisco SG200 Series Specifications

General

Model	SG200 Series
Layer	Layer 2
Type	Smart Switch
Port Type	Gigabit Ethernet
Form Factor	Desktop or Rack-mountable
Management	SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security	Yes
MAC Address Table	8K
Jumbo Frame Support	Yes
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	10% to 90% non-condensing
Power Supply	Internal
Ports	8
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps