Cisco SG200 Series User Manual

Administration
File Management
Cisco Small Business SG200 Series 8-port Smart Switch 54
3
STEP 6 Click Apply and then click Close. Your changes are saved to the Running
Configuration.
File Management
You can use the file management features to upgrade or backup the firmware,
update the language files, save configuration changes, copy configuration files
within the switch, and set up autoconfiguration feature.
NOTE When any download or upload to or from the switch is in progress, all management
access to the switch is blocked until the transfer is complete to protect the switch
from any unknown changes.
NOTE When logging in by using HTTP/HTML, and you can choose from more than one
network port, you should the lowest number port.
See the following topics for more information on the configuration pages available
in the File Management menu:
• Upgrading and Backing Up Firmware and Language Files
• Downloading and Backing Up the Configuration and Log Files
• Delete Configuration
• Copying and Saving Configuration Files
• DHCP Auto Configuration
• Firmware Recovery Over HTTP
• Downloading an Image or Boot Code File From the System Boot Prompt

Cisco SG200 Series Specifications

General

Model	SG200 Series
Layer	Layer 2
Type	Smart Switch
Port Type	Gigabit Ethernet
Form Factor	Desktop or Rack-mountable
Management	SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security	Yes
MAC Address Table	8K
Jumbo Frame Support	Yes
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	10% to 90% non-condensing
Power Supply	Internal
Ports	8
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps