Cisco SG200 Series User Manual

2
Cisco Small Business SG200 Series 8-port Smart Switch 18
Viewing Statistics
This chapter describes how to display switch statistics.
It contains the following topics.
• System Summary
• Interface Statistics
• Etherlike Statistics
• 802.1X EAP Statistics
• IPv6 DHCP Statistics
• RADIUS Statistics
• Logs
System Summary
The System Summary page displays basic information such as the hardware
model description, software version, language packs, and system up time.
Displaying the System Summary
To view system information, click Status and Statistics > System Summary in the
navigation window. Or, click System Summary under Device Status on the
Getting Started page.
The System Summary page displays the following information:
• System Description—A description of the system.
• System Location—Physical location of the switch. Click Edit to display the
System Settings page and enter this value. (The characters ', ", %, and ? are
not supported.)

Cisco SG200 Series Specifications

General

Model	SG200 Series
Layer	Layer 2
Type	Smart Switch
Port Type	Gigabit Ethernet
Form Factor	Desktop or Rack-mountable
Management	SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security	Yes
MAC Address Table	8K
Jumbo Frame Support	Yes
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	10% to 90% non-condensing
Power Supply	Internal
Ports	8
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps