Cisco SG200 Series User Manual

10
Cisco Small Business SG200 Series 8-port Smart Switch 146
Security
This chapter describes the security features for the port, user, and server.
It includes the following topics:
• RADIUS
• Password Strength
• Management Access Profile Rules
• Authentication Methods
• Storm Control
• Port Security
• 802.1X
RADIUS
The switch supports Remote Authorization Dial-In User Service (RADIUS) client
functionality. RADIUS has become the protocol of choice by administrators of
large accessible networks for authenticating users prior to access. To authenticate
users in a secure manner, a RADIUS client and RADIUS server are configured with
the same shared password or secret. This secret is used to generate one-way
encrypted authenticators that are present in all RADIUS packets. Without
knowledge of the secret, the possibility of a malicious user correctly spoofing
packets is sufficiently reduced.
The RADIUS client on the switch is used for switch management access
authentication and IEEE 802.1X (dot1X) port access control (see Management
Access Profile Rules and 802.1X).
You can use the RADIUS page to configure global RADIUS settings and add
RADIUS servers.

Cisco SG200 Series Specifications

General

Model	SG200 Series
Layer	Layer 2
Type	Smart Switch
Port Type	Gigabit Ethernet
Form Factor	Desktop or Rack-mountable
Management	SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security	Yes
MAC Address Table	8K
Jumbo Frame Support	Yes
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	10% to 90% non-condensing
Power Supply	Internal
Ports	8
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps