Cisco SG200 Series User Manual

4
Cisco Small Business SG200 Series 8-port Smart Switch 90
Port Management
This chapter describes how to configure switch port settings, combine ports into
link aggregation groups, and configure port power features.
The following topics are included:
• Configuring Port Settings
• Link Aggregation
• Configuring PoE
• Green Ethernet
Configuring Port Settings
The Port Settings page enables you to administratively enable and disable ports
and to configure autonegotiation of port speed and duplex mode. You can also use
this page to configure flow control on the port.
To configure port settings:
STEP 1 Click Port Management > Port Settings in the navigation window.
STEP 2 Select the interface to configure, and then click Edit.
STEP 3 Specify the following for the selected port:
• Administrative Status—Select Up to enable the port or Down to disable it.
• Auto Negotiation—Select Enable to allow the switch autonegotiate the port
speed and duplex mode with the connected device. If Autonegotiation is
enabled, the Administrative Port Speed and Duplex Mode fields are not
editable.
• Administrative Port Speed—If Auto Negotiation is disabled, select whether
the port is capable of 10 Mbit/s or 100 Mbit/s operation.

Cisco SG200 Series Specifications

General

Brand	Cisco
Model	SG200 Series
Category	Switch
Language	English