Cisco SPA 508G Administration Guide

Getting Started
Cisco SPA 500S Attendant Console
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 4
1
Cisco SPA 500S Attendant Console
The Cisco SPA 500S Attendant Console is used with the Cisco SPA 300 Series
and Cisco SPA 500 Series IP Phone models to provide additional lines. The Cisco
SPA 500S has 32 LEDs/buttons for dialing, call transfer, call pick up and call
monitoring. Multi-colored LEDs monitor the status of each configured voice line via
busy lamp field (BLF). You can attach two attendant consoles to an IP phone, for 64
LEDs/buttons. For more information, see Chapter 9, “Configuring the Cisco SPA
500S Attendant Console.”
Network Configurations
The Cisco SPA IP Phones support Session Initiation Protocol (SIP) or Smart Phone
Control Protocol (SPCP). SPCP is supported only on the Cisco SPA 300 Series or
Cisco SPA 500 Series IP Phones.) You can use the Cisco SPA IP Phones as part of
a Cisco SPA 9000 Voice System phone network, or with any vendor’s IP PBX
system that supports SIP. The Cisco SPA IP phones can be used as part of a Cisco
SPA 9000 Voice System phone network, a SIP network, or as part of the Cisco
Unified Communications 500 Series for Small Business.

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g