Cisco SPA 508G Administration Guide

Customizing Cisco SPA and Wireless IP Phones
Configuring BroadSoft Settings (Cisco SPA 300 Series and Cisco SPA 500 Series)
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 78
3
The following graphic is an example of an LDAP configuration:
For more information on LDAP, including troubleshooting information, see the
Configuring LDAP Directory Search on SPA SIP IP Phones Application Note,
available from http://www.cisco.com/web/partners/sell/smb/products/
voice_and_conferencing.html#~vc_technical_resources
(partner log on required).
Configuring BroadSoft Settings (Cisco SPA 300 Series and
Cisco SPA 500 Series)
Configuring BroadSoft Directory
The BroadSoft directory service enables users to search and view their personal,
group, or enterprise contacts. This application feature uses BroadSoft's Extended
Services Interface (XSI).
LDAP Number Mapping Can be blank if not needed.
NOTE With the LDAP number mapping you can
manipulate the number that was retrieved from the
LDAP server. For example, you can append 9 to the
number if your dial plan requires a user to enter 9
before dialing. Add the 9 prefix by adding (<:9xx.>) to
the LDAP Number Mapping field. For example, 555
1212 would become 9555 1212.
If you do not manipulate the number in this fashion, a
user can use the Edit Dial feature to edit the number
before dialing out.
Parameter Description

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g