Cisco SPA 508G Administration Guide

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 269
B
XML Service
The Cisco SPA 300 Series and the Cisco SPA 500 Series IP Phones support XML
services, such as an XML Directory Service or other XML applications. (Not
applicable to the Cisco SPA 301 or the Cisco SPA 501.)
The following configuration fields are available:
Extension Mobility
For more information, see Configuring Extension Mobility, page 83.
NOTE Does not apply to the WIP310.
LDAP Number Mapping Can be blank if not needed.
NOTE With the LDAP number mapping you can
manipulate the number that was retrieved from the
LDAP server. For example, you can append 9 to the
number if your dial plan requires a user to enter 9
before dialing. Add the 9 prefix by adding (<:9xx.>) to
the LDAP Number Mapping field. For example, 555
1212 would become 9555 1212.
If you do not manipulate the number in this fashion, a
user can use the Edit Dial feature to edit the number
before dialing out.
Parameter Description
Parameter Description
XML Directory Service Name Name of the XML Directory. Displays on the user’s
phone as a directory choice.
XML Directory Service URL URL where the XML Directory is located.
XML Application Service Name of the XML application. Displays on the user’s
phone as a web application choice.
XML Application Service URL URL where the XML application is located.

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g