Cisco SPA 508G Administration Guide

Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 12
1
Cisco SPA 525G/525G2
STEP 1 Log in to the configuration utility for the phone.
STEP 2 Choose the Firmware Upgrade tab.
STEP 3 Click Firmware Upgrade Window.
STEP 4 Browse to select the firmware file from your PC. Click Submit. The firmware is
installed and your phone reboots.
WIP310
STEP 1 Turn off your WIP310 and connect it to your computer by using the USB cable.
STEP 2 Double-click the executable file for the firmware upgrade (for example, double-
click wip310-5-0-11.exe).
STEP 3 Follow the on-screen instructions.
STEP 4 When the upgrade is complete, disconnect the phone from your PC and power it
on.
Using the Web-Based Configuration Utility
You must be connected to the same network as your phone. For example, if you
are connected to a VPN, you must first disconnect.
NOTE If you are using the Cisco SPA IP Phones with the Cisco Unified Communications
500 Series for Small Business for Call Control, use Cisco Unified Communication
Manager Express or Cisco Configuration Assistant for phone administration. For
more information, refer to the
Cisco Unified Communications 500 Office
Administrator Guide
or the Cisco Configuration Assistant Smart Business
Communications System Administrator Guide .

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g