Cisco SPA 508G Administration Guide

7
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 153
Configuring Regional Parameters and
Supplementary Services
Use the Regional tab to configure regional and local settings, such as Vertical
Service Activation codes (star codes), Vertical Service Announcement Codes, and
local language and dictionary. See the following sections:
• Advanced Scripting for Cadences, Call Progress Tones, and Ring Tones,
page 154
• Call Progress Tones, page 157
• Distinctive Ring Patterns, page 157
• Control Timer Values (sec), page 158
• Vertical Service Announcement Codes (Cisco SPA 300 and Cisco SPA
500 Series), page 164
• Miscellaneous Parameters, page 167
• Localizing Your IP Phone, page 168
• Selecting a Display Language, page 171
Cisco IP phones have configurable call progress tones. Parameters for each type
of tone can include number of frequency components, frequency and amplitude of
each component, and cadence information.
The call progress tone pass-through feature lets you hear call progress tones
(such as ringing) that are generated from the far-end network.

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g