Cisco SPA 508G Administration Guide

Configuring the Cisco SPA 500S Attendant Console
Setting Up the Cisco SPA 500S Attendant Console
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 189
9
Configuring the Cisco SPA 9000 for the Cisco SPA 500S
You must still enable Computer Telephony Integration (CTI) on the Cisco SPA 9000
configuration utility, as shown in the following procedure:
STEP 1 Connect to the web-based configuration utility for the Cisco SPA 9000.
STEP 2 Click Admin Login on the configuration utility page.
STEP 3 If necessary, enter admin and your password, then Advanced.
STEP 4 Click the SIP tab.
STEP 5 In the SIP Parameters section, select yes from the CTI Enable drop-down list.
STEP 6 Click Submit All Changes.
Configuring the BroadSoft Server for the Cisco SPA 500S
The BroadSoft server requires you to assign IP phone users to the Busy Lamp
(BLF) Monitor Users List. The BroadSoft server sends updates on the status of
each phone on this list to the Cisco SPA 500S, which subscribes for this service.
To configure the BroadSoft server to support the Cisco SPA 500S:
STEP 1 On the BroadSoft server, in the user profile used by the phone to register with the
BroadSoft server, select Assign Services.
STEP 2 On the Assign Services page, from the Available Services column, move Busy
Lamp to the User Services column.
STEP 3 Define the List URI used by the Cisco SPA 500S to register for BLF monitoring
service with the BroadSoft server. This value must match the value entered
following the sub = keyword (for example, cisco_list). Select the domain from
the drop-down list to match the Unit Key.
NOTE If you configure more than one monitored list on the BroadSoft server, use the vid=
keyword in each unit/keyconfiguration script to specify the phone extension to use
for each list.

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g