Configuring the Cisco SPA 500S Attendant Console
Setting Up the Cisco SPA 500S Attendant Console
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 195
9
BroadSoft syntax
For example, the following enables speed dialing and BLF monitoring, with a BLF
monitoring list URI of marketing, for the user account reception, on a BroadSoft
server with the IP address 192.168.100.1:
fnc=sd+blf;sub=marketing@192.168.100.1;usr=reception@192.168.100.1
The
nme
keyword is not used because the BroadSoft server uses the user
account name assigned to the BLF monitoring list.
Note that you can configure a list of BLF subscriptions automatically using a URI
(rather than individually configuring each BLF entry). See the “Configuring
BroadSoft Busy Lamp Field Auto-Configuration” section on page 195.
Asterisk syntax
The following is an example entry for a Asterisk server. This entry enables speed
dialing, BLF monitoring, and call pickup on a Asterisk server with the IP address
192.168.1.11:
fnc=sd+blf+cp;sub=35890@192.168.1.11;nme=35890
Configuring BroadSoft Busy Lamp Field Auto-Configuration
Rather than configuring each BLF key individually, you can enter a single
SUBSCRIBE URI and automatically generate configuration scripts for BLF keys for
all users on the monitored list.
To configure BLF auto-configuration:
STEP 1 Log in to the configuration utility.
STEP 2 Click Admin Login.
STEP 3 Click advanced.
STEP 4 Click the Att Console tab.
To Next Page
Loading...
