Cisco SPA 508G Administration Guide

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 270
B
Programmable Softkeys
The Cisco SPA 300 Series and Cisco SPA 500 Series IP phones (models with
display screens) have four softkeys on the screen that, when pressed, perform
certain actions.
You can customize the softkeys displayed on the phone, and create your own
softkeys for speed dials or XML scripts. Customized softkey information is entered
in the PSK1 through PSK6 fields.
Parameter Description
Extension Mobility Enable or disable extension mobility.
Defaults to no (disabled).
EM User Domain The user domain for extension mobility.
Defaults to blank.
Parameter Description
Programmable Softkey Enable Enables programmable softkeys (SPA 525G/525G2
only).
Idle Key List Softkeys that display when the phone is idle. See
Customizing Phone Softkeys, page 52 for more
information.
Missed Call Key List Softkeys that display when a call has been missed.
See Customizing Phone Softkeys, page 52 for
more information.
Off Hook Key List Softkeys that display when the receiver is lifted, or
the headphone or speakerphone buttons are
pressed. See Customizing Phone Softkeys,
page 52 for more information.
Dialing Input Key List Softkeys that display when the user must enter
dialing data. See Customizing Phone Softkeys,
page 52 for more information.

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g