Cisco SPA 508G Administration Guide

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 204
B
NTP Enable (Cisco SPA
525G/525G2 only)
Shows if Network Time Protocol is enabled.
Primary NTP Server (Cisco
SPA 525G/525G2 only)
IP Address of the primary NTP server.
Secondary NTP Server
(Cisco SPA 525G/525G2
only)
IP Address of the secondary NTP server.
TFTP Server (Cisco SPA
525G/525G2 only)
Address of the TFTP server for provisioning.
Bluetooth Enabled (Cisco SPA
525G/525G2 only)
Shows if Bluetooth is enabled.
Bluetooth Firmware Version
(Cisco SPA 525G/525G2
only)
Displays the Bluetooth firmware version.
Bluetooth Connected (Cisco
SPA 525G/525G2 only)
Shows if a Bluetooth device is connected to the phone.
Bluetooth MAC (Cisco SPA
525G/525G2 only)
Shows the hardware address of the Bluetooth device.
Connected Device ID (Cisco
SPA 525G/525G2 only)
Shows the name of the connected Bluetooth device.
Wireless Enabled (Cisco SPA
525G/525G2 only)
Shows if Wireless-G is enabled on the phone.
Wireless Connected (Cisco
SPA 525G/525G2 only)
Shows if the phone is connected to the wireless
network.
Wireless MAC (Cisco SPA
525G/525G2 only)
Shows the hardware address of the Wireless-G
controller.
SSID (Cisco SPA 525G/
525G2 only)
Shows the SSID, or name of the wireless router to
which the phone is connected.
Standard Channel (Cisco SPA
525G/525G2 only)
Shows the wireless channel being used in the wireless
connection.
Security Mode (Cisco SPA
525G/525G2 only)
Shows if wireless security is configured on the phone
(yes or no).
Parameter Description

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g