Cisco SPA 508G Administration Guide

Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 18
1
Customize individual extension parameters,
including:
• Shared line/call appearance
• NAT settings
• SIP settings such as SIP debug and SIP port
• Mailbox ID, MOH server
• Voice mail server
• Proxy and registration information
• Subscriber information such as user ID and
password
• Audio settings
• Dial plan settings
Ext tab
(1-6, depending on phone model)
See Chapter 2, “Configuring
Lines and Extensions.”
Customize user-level parameters, including:
• Call forward
• Speed dial
• Supplementary services
• Web information (RSS newsfeeds)
• Traffic information settings
• Audio volume
• Phone GUI settings
User tab
See Chapter 3, “Customizing
Cisco SPA and Wireless IP
Phones.”
View and change parameters for Unit 1 and Unit 2
(applicable only to Cisco SPA 300 Series or Cisco
SPA 500 Series IP Phones with one or two Cisco
SPA 500S attendant consoles attached)
Attendant Console tab
See Chapter 9, “Configuring the
Cisco SPA 500S Attendant
Console.”
To perform these tasks... In the configuration utility, click
the ...

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g