Cisco SPA 508G Administration Guide

Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 4
Contents
Configuring BroadSoft Settings (Cisco SPA 300 Series and
Cisco SPA 500 Series) 78
Configuring BroadSoft Directory 78
Configuring Synchronization of Do Not Disturb and Call Forward 79
Configuring XML Services 80
Configuring Music On Hold 82
Configuring Extension Mobility 83
Configuring Video Surveillance on the Cisco SPA 525G/525G2 84
Configuring the User Name and Account on the Camera 85
Entering Camera Information Into the Cisco SPA525G/525G2
Configuration Utility 85
Viewing the Video 86
Chapter 4: Configuring SIP, SPCP, and NAT 87
Session Initiation Protocol and Cisco IP Phones 87
SIP Over TCP 88
SIP Proxy Redundancy 89
Configuring Survivable Remote Site Telephony (SRST) Support 89
RFC3311 Support 90
Support for SIP NOTIFY XML-Service 90
Configuring SIP 90
Configuring SIP Parameters 90
Configuring SIP Timer Values 94
Configuring Response Status Code Handling 97
Configuring RTP Parameters 97
Configuring SDP Payload Types 99
Configuring SIP Settings for Extensions 102
Configuring a SIP Proxy Server 106
Configuring Subscriber Information Parameters 109
Configuring SPCP on the Cisco SPA 525G/525G2 110
Configuring SPCP on the Cisco SPA 300 Series and
Cisco SPA 50XG 111
Network Address Translation (NAT) and Cisco IP Phones 111

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g