Need help?Do you have a question about the Cisco SRP521W and is the answer not in the manual?
General| Wireless Standard | 802.11b/g |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 54 Mbps |
| Ethernet Ports | 4 x 10/100 Mbps |
| WAN Port | 1 x 10/100 Mbps |
| Security | WEP, WPA, WPA2 |
| VPN Support | IPSec, PPTP |
| Firewall | SPI |
Step-by-step guide on accessing the device's web-based configuration interface.
Introduces basic setup for WAN, LAN, Wireless, and Remote Provisioning.
Guides through configuring the Ethernet WAN connection type and settings.
Details the steps for setting up an ADSL WAN interface, including VC and IP settings.
Provides instructions for configuring the Local Area Network (LAN) interface settings.
Outlines the process for configuring basic wireless network settings like SSID and security.
Details how to configure WAN interfaces, including internet setup, failover, and MAC cloning.
Guides through configuring the LAN interface, including DHCP server settings and VLANs.
Covers basic and advanced wireless settings, including Wi-Fi Protected Setup and MAC filtering.
Instructions for setting up fixed routes for network traffic to specific destinations.
Details Network Address Translation (NAT) settings, including port forwarding and triggering.
Explains how to configure bandwidth control, QoS policies, CoS to Queue, and DSCP to Queue.
Covers firewall filter settings, internet access control, and DoS attack protection.
Allows configuration of numerous SIP parameters and values for voice calls.
Defines parameters for setting up IKE rules for VPN connections.
Details IPSec SA parameters for setting connection type and key type for VPNs.
Sets up communication with ACS servers via TR-069 (CWMP) for remote management.
Covers upgrading device firmware and backing up/restoring configuration settings.
To Next Page
