Viewing the Services Ready Platform Status
VPN Status
169 Services Ready Platform SRP 500 Series Administration Guide
10
VPN Status
You can view VPN status information from the configuration utility.
CDP Neighbor Information
You can view Neighbor information from the configuration utility.
STEP 1 Click Status on the tab and then click CDP Neighbor Information in the navigation
pane. The CDP Neighbor Information page appears.
Field Description
Tunnel Name The name of the VPN tunnel.
Remote Policy The remote network policy.
Local Policy The local network policy.
IKE Algorithm The final result of IKE algorithm after ISAKMP. Only
applies to the “AUTO” mode.
IPSec Algorithm The IPSec algorithm this tunnel is now using.
TX Bytes The number of transmitted bytes of this tunnel.
RX Bytes The number of received bytes of this tunnel.
Connect Status Only applies to the “AUTO” mode.
To Next Page
Loading...
