Administration Settings
Time Setup
135 Services Ready Platform SRP 500 Series Administration Guide
8
Time Setup
This feature allows you set parameters related to time for the Service Ready
Platfrom.
STEP 1 Click Administration on the tab and then click Time Setup in the navigation pane.
The Time Setup page appears.
STEP 2 Choose your timezone.
STEP 3 Select Adjust Clock for Daylight Saving Changes option if you want the Services
Ready Platform to automatically adjust for daylight saving time.
STEP 4 If you want to use the default Network Time Protocol (NTP) server, use the default
setting, Auto. If you want to specify the NTP server, select Manual, and enter the
URL or IP address of the NTP server you want to use.
STEP 5 The Resync timer controls how often the Services Ready Platform resyncs with
the NTP server. Enter the number of seconds you want the interval to be.
Field Description
TFTP Specify whether TFTP is enabled or disabled. The
default is Disabled.
Interface The interface can be used to get remote file.
URL The URL of the remote file.
File Filename of the remote file.
Save As Filename to be given to the saved file.
User Name Username required to access the remote file.
User Password Password required to access the remote file.
Port Port number required to access the remote file.
Timeout Timeout value interval.
Retry Retry count value.
Status Name and size of the remote file.
To Next Page
Loading...
Need help?
General
