Configuring the Network
UPnP
105 Services Ready Platform SRP 500 Series Administration Guide
5
UPnP
Universal Plug and Play (UPnP) allows computers to automatically configure the
Services Ready Platform for various Internet applications, such as gaming and
videoconferencing.
STEP 1 Click Network Setup on the tab and then click UPnP in the navigation pane. The
UPnP page appears.
STEP 2 If you want to use UPnP, use the default setting, Enabled. Otherwise, select
Disabled.
STEP 3 If you do not want to be able to make manual changes to the Services Ready
Platform while using the UPnP feature, select Disabled. Otherwise, use the default
setting, Enabled.
STEP 4 To keep UPnP configuration settings after system reboot, click Enabled.
STEP 5 To prohibit any and all Internet connections, click Enabled.
STEP 6 Click Submit to save your settings.
To Next Page
Loading...
Need help?
General
