5
Services Ready Platform SRP 500 Series Administration Guide 78
Configuring the Network
This chapter describes how to configure the network including static routing, NAT,
QoS, the firewall, PPPoE, DDNS, IGMP, UPnP, and CDP.
• Static Routing, page 78
• NAT, page 81
• QoS, page 86
• Firewall, page 91
• PPPoE Relay, page 96
• DDNS, page 98
• IGMP, page 103
• UPnP, page 105
• CDP Setting, page 106
Static Routing
These features are used to set up advanced functions of the Services Ready
Platform. Dynamic Routing automatically adjusts how packets travel on your
network. Static Routing sets up a fixed route to another network destination.
Static Routes
The settings for Static Routes are set on this page. It shows the current static
routing list and details of the selected route.
STEP 1 Click Network Setup on the tab and then click Routing in the navigation pane. The
Static Route Rule page appears.
STEP 2 Click Add Entry. The Static Routing Add page opens.
To Next Page
Loading...
Need help?
General
