Cisco SRP521W User Manual

2
Services Ready Platform SRP 500 Series Administration Guide 15
Getting Started with the Configuration Utility
This chapter describes how to login and use the Services Ready Platform
Configuration Utility.
• Logging In to the Configuration Utility, page 15
• Using the Configuration Utility, page 16
Logging In to the Configuration Utility
Before you begin to use the Configuration Utility, make sure that you have a
computer that meets the following requirement:
• • Adobe Flash Player version 9.0.124 or later. Visit http://get.adobe.com/
flashplayer/ to download and install the latest Adobe Flash Player.
STEP 1 Connect a computer to an available LAN port of your Services Ready Platform.
By default, your PC will become a DHCP client of the Cisco SRP 500 Series
Services Ready Platform and will receive an IP address in the 192.168.15.x range.
STEP 2 Start a web browser. In the Address bar, enter the default IP address of the Cisco
SRP 500 Series Services Ready Platform: http://192.168.15.1.
STEP 3 When the login page appears, enter the username and password to login as the
administrator.
The default username is admin.
The default password is admin.
NOTE Passwords are case sensitive.

Cisco SRP521W Specifications

General

Brand	Cisco
Model	SRP521W
Category	Wireless Router
Language	English