Setting up the Interfaces of the Services Ready Platform
Setting up the Wireless LAN
75 Services Ready Platform SRP 500 Series Administration Guide
4
WMM Setting
The Services Ready Platform features WMM Support. The No Acknowledgement
feature is available only when the WMM Support feature is enabled.
STEP 1 Click Interface Setup on the tab and then click WiFi Setting in the navigation pane.
Click WMM Setting. The WMM Setting page appears.
STEP 2 If you have other devices on your network that support WMM Support, you can
select Enabled for the WMM Support option.
STEP 3 In the No Ackowledgement option, select Enabled to disable the
acknowledgement feature, so the Services Ready Platform will not resend data if
an error occurs.
STEP 4 Click Submit to save your settings.
Beacon Interval The Beacon Interval value indicates the frequency
interval of the beacon. A beacon is a packet broadcast
by the Services Ready Platform to synchronize the
wireless network. Enter a value between 20 and 65,535
milliseconds. The default value is 100.
Power Control The WiFi output power from the Services Ready
Platform. From this drop-down menu, choose High,
Middle, or Low value to cover a range of the wireless
network. The default is High.
Field Description
To Next Page
Loading...
Need help?
General
