Cisco SRP521W User Manual

Configuring the Network
CDP Setting
Services Ready Platform SRP 500 Series Administration Guide 106
5
CDP Setting
Cisco Discovery Protocol (CDP) is a feature that enables network administrators to
access a summary of protocol and address information about other devices that
are directly connected to the device initiating the command.
STEP 1 Click Network Setup on the tab and then click CDP Setting in the navigation pane.
The CDP Setting page appears.
STEP 2 Select CDP options.
STEP 3 Select CDP Setting per Ethernet port.
STEP 4 Click Submit to save your settings.
Field Description
UPnP If you want to use UPnP, use the default setting, Enabled.
Otherwise, select Disabled.
Allow Users to
Configure
If you do not want to be able to make manual changes to
the Services Ready Platform while using the UPnP
feature, select Disabled. Otherwise, use the default
setting, Enabled.
Keep UPnP
Configurations After
System Reboot
This choice will decide to save UPnP configuration after
system reboot. The default is disabled.
Allow Users to
Disable Internet
Access
If you want to be able to prohibit any and all Internet
connections, select Enabled. Otherwise, use the default
setting, Disabled.

Cisco SRP521W Specifications

General

Brand	Cisco
Model	SRP521W
Category	Wireless Router
Language	English