Administration Settings
Time Setup
Services Ready Platform SRP 500 Series Administration Guide 136
8
STEP 6 Click Submit to save your settings.
Field Description
Date Enter the current date to set the date manually.
Time Enter the current time to set the time manually.
Time Zone The timezone that the Services Ready Platform is set to.
Automatically adjust
clock for daylight
saving changes
Select this option if you want the Services Ready
Platform to automatically adjust for daylight saving time.
This option is enabled by default.
Time Ser ver
Address
If you want to use the default Network Time Protocol
(NTP) server, use the default setting, Auto. If you want to
specify the NTP server, select Manual, and enter the
URL or IP address of the NTP server you want to use.
To Next Page
Loading...
Need help?
General
