The Quick Setup Menu
Basic Configuration Setup
23 Services Ready Platform SRP 500 Series Administration Guide
3
PPTP
Point-to-Point Tunneling Protocol (PPTP), is a service
that applies to tunneling connections.
•
Internet IP Address and Subnet Mask
The IP Address and Subnet Mask as seen by external
users on the Internet (including your ISP). If your Internet
connection requires a static IP address, then your ISP will
provide you with a Static IP Address and Subnet Mask.
• Gateway
Your ISP will provide you with the Gateway IP Address.
• DNS 1-3
Your ISP will provide you with at least one DNS Server IP
Address. If you wish to use another, type that IP Address
in one of these fields. You can type up to three DNS
Server IP Addresses here. The Router will use these for
quicker access to functioning DNS servers.
• PPTP Server IP
This is the IP address of the PPTP Server. Enter the IP
address provided by your ISP.
• User Name and Password
Enter the User Name and Password you use when logging
onto your ISP through a PPTP connection.
• Connect on Demand
If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. If you wish to
activate Connect on Demand, click the radio button. If you
want your Internet connection to remain active at all times.
Otherwise, enter the number of minutes you want to have
elapsed before your Internet connection terminates.
• Keep Alive
This option keeps you connected to the Internet
indefinitely, even when your connection sits idle. Click the
radio button next to Keep Alive. The default Redial Period
is 30 seconds (in other words, the Router will check the
Internet connection every 30 seconds).
Field Description
To Next Page
Loading...
Need help?
General
