Cisco SRP521W User Manual

Configuring the Network
PPPoE Relay
97 Services Ready Platform SRP 500 Series Administration Guide
5
STEP 1 Click Network Setup on the tab and then click PPPoE Relay in the navigation pane.
The PPPoE Relay page appears.
STEP 2 Click Add Entry. The PPPoE Relay page opens.
STEP 3 Choose a WAN option.
STEP 4 Choose a LAN option.
STEP 5 To enable the PPPoE Relay feature for the Internet side, click Enabled.
STEP 6 Click Submit to save your settings.
Field Description
WAN option The WAN interface option.
Lan option The LAN interface option.
PPPoE Relay Status To enable the PPPoE Relay feature for the Internet side,
select Enabled. The default setting is Disabled.

Cisco SRP521W Specifications

General

Brand	Cisco
Model	SRP521W
Category	Wireless Router
Language	English