D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
110
Cisco TelePresence SX20 Quick Set Administrator Guide
Peripherals Profile TouchPanels
Define the number of Cisco Touch controllers that are expected to be connected to the
video system. This information is used by the video system's diagnostics service. If the
number of connected Touch controllers does not match this setting, the diagnostics service
will report it as an inconsistency.
Requires user role: ADMIN, INTEGRATOR
Default value: NotSet
Value space: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one Cisco Touch controller should be connected to the video system.
0-5: Select the number of Touch controllers that are expected to be connected to the
video system. Note that only one Cisco Touch controller is officially supported.
To Next Page
Loading...
