Cisco TelePresence SX20 Quick Set - Restrict the access to the Settings menu

D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
24
Cisco TelePresence SX20 Quick Set Administrator Guide
Restrict the access to the Settings menu
By default, any user has access to the Settings menu on the user
interface.
We recommend that you restrict the access to prevent
unauthorized users from changing the configuration of the video
system.
Lock down the Settings menu
1. Sign in to the web interface, and navigate to
Setup > Configuration.
2. Go to UserInterface > SettingsMenu > Mode, and select
Locked.
Now a user has to sign in with ADMIN credentials to get
access to the system-critical settings on the user interface
(Touch controller or on-screen menu).
Unlock the Settings menu
1. Sign in to the web interface, and navigate to
Setup > Configuration.
2. Go to UserInterface > SettingsMenu > Mode, and select
UnLocked.
Now any user has access to the complete Settings menu on
the user interface (Touch controller or on-screen menu).
Authentication
If you click on the padlock, you are asked
to sign in with an ADMIN user.
Once logged in, you can access all
settings until you close the Settings
menu.
Locked down settings
Locked down settings are marked with a padlock.
The Settings menu on the user interface
If the menu is locked down, you must sign in to access the
system-critical settings.
Select the settings icon (cogwheel) in the status bar of the user
interface followed by Settings, in order to open the Settings
menu.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Configuration