Cisco TelePresence SX20 Quick Set - Add a Sign in Banner

D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
26
Cisco TelePresence SX20 Quick Set Administrator Guide
About sign in banner
If a system administrator wants to provide
initial information to all users, he can
create a sign in banner. The message is
shown when the user signs in to the web
interface or the command line interface.
Add a sign in banner
Sign in to the web interface, and navigate
to Security > Sign In Banner.
1. Enter the message that you want to
present to the user when he signs in.
2. Click Save to activate the banner.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Configuration