Cisco TelePresence SX20 Quick Set - Security Session Maxtotalsessions; Security Session Showlastlogon

D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
120
Cisco TelePresence SX20 Quick Set Administrator Guide
Security Session MaxTotalSessions
The maximum number of simultaneous sessions in total is internally limited to 20 sessions.
0, which is the default value, means 20 sessions.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..100)
The maximum number of sessions in total. 0 means no hard limit.
Security Session ShowLastLogon
When logging in to the system using SSH or Telnet you will see the UserId, time and date of
the last session that did a successful login.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
On: Show information about the last session.
Off: Do not show information about the last session.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings