D15329.08 SX20 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
173
Cisco TelePresence SX20 Quick Set Administrator Guide
IP NETWORK FEATURES
• Domain Name System (DNS) lookup for service
configuration
• Differentiated services (quality of service (QoS))
• IP adaptive bandwidth management (including flow
control)
• Auto gatekeeper discovery
• Dynamic playout and lip-sync buffering
• H.245 dual-tone multifrequency (DTMF) tones in
H.323
• Date and time support using the Network Time
Protocol (NTP)
• Packet loss based downspeeding
• Uniform resource identifier (URI) dialing
• TCP/IP
• Dynamic Host Configuration Protocol (DHCP)
• IEEE 802.1x network authentication
• IEEE 802.1q VLAN
• IEEE 802.1p QoS and class of service
• ClearPath
IPV6 NETWORK SUPPORT
• Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP,
HTTPS, DNS and DiffServ
• Support for static IP address assignment, stateless
autoconfiguration and DHCPv6
EMBEDDED ENCRYPTION
• H.323 and SIP point-to-point
• Standards-based: H.235 v3 and Advanced
Encryption Standard (AES)
• Automatic key generation and exchange
• Support in dual stream
CISCO UNIFIED COMMUNICATIONS MANAGER
(requires Cisco UCM version 8.6 or later)
• Native registration with Cisco Unified
Communications Manager
• Basic Cisco Unified Communications Manager
provisioning
• Firmware upgrade from Cisco Unified
Communications Manager
• Cisco Discovery Protocol and DHCP option 150
support
• Basic telephony features such as hold, resume,
transfer, and corporate directory lookup
SECURITY FEATURES
• Management using HTTPS and SSH
• IP administration password
• Menu administration password
• Disable IP services
• Network settings protection
NETWORK INTERFACES
• One LAN and Ethernet (RJ-45) 10/100/1000 Mbps
OTHER INTERFACES
• Two USB host for future use
• Serial port available via USB and RS-232 adapter, or
via camera port with Y-cable
PRECISIONHD 1080P12X CAMERA
• 12 × optical zoom
• Motorized +15°/-25° tilt
• Motorized ± 90° pan
• 43.5° vertical field of view
• 72° horizontal field of view
• F 1.7
• Focus distance 0.3 m – infinity
• 1920 × 1080 pixels progressive at 60 fps
• Other formats supported (configurable through
Dip-switch): 1920 × 1080@60 fps (HDMI only), 1920
× 1080@50 fps (HDMI only), 1920 × 1080@30 fps,
1920 × 1080@25 fps, 1280 × 720@60 fps, 1280
× 720@50 fps, 1280 × 720@30 fps, 1280 ×
720@25 fps
• Automatic or manual focus, brightness and white
balance
• Far-end camera control
• HDMI and HD-SDI output, and Daisy chain
• Upside-down mounting with automatic flipping of
picture
PRECISION 40
PRECISIONHD 1080P4X S2 CAMERA
• 4 × optical zoom
• Motorized +15°/-25° tilt
• Motorized ± 90° pan
• 43.5° vertical field of view
• 70° horizontal field of view
• F 1.7
• Focus distance 0.3 m – infinity
• 1920 × 1080 pixels progressive at 60 fps
• Automatic or manual focus, brightness and white
balance
• Far-end camera control
• Dual HDMI / Camera Control
• Upside-down mounting with manual flipping of
picture
PRECISIONHD 1080P 2.5X CAMERA
• 2.5 × optical zoom
• Motorized +5°/-25° tilt
• Motorized ± 30° pan
• 51.5° vertical field of view
• 83° horizontal field of view
• F 2.0
• Focus distance 0.3 m – infinity
• 1920 × 1080 pixels progressive at 60 fps
• Automatic or manual focus, brightness and white
balance
• Far-end camera control
• Dual HDMI / Camera Control and USB output
• Upside-down mounting with automatic flipping of
picture
SYSTEM MANAGEMENT
• Support for the Cisco TelePresence Management
Suite
• Total management using embedded SNMP, Telnet,
SSH, XML and SOAP
• Remote software upload using web server, SCP,
HTTP and HTTPS
DIRECTORY SERVICES
• Support for local directories (My Contacts)
• Corporate directory
• Unlimited entries using server directory supporting
Lightweight Directory Access Protocol (LDAP)
and H.350 (available with Cisco TelePresence
Management Suite)
• Unlimited number for corporate directory (available
with Cisco TelePresence Management Suite)
• Received calls with date and time
• Placed calls with date and time
• Missed calls with date and time
USER INTERFACE
• Remote control (TRC6) and on-screen menu
• Cisco TelePresence Touch 10
POWER
• Autosensing power supply
• External power supply: Lite-On PA-1600-2A-LF
- AC input: 2 A, 100 – 240 V, 50-60 Hz
- DC output: 5.0 A, 12.0 V
• Power consumption under normal operating
conditions as defined in IEC 60950-1: 25 W for
codec and main camera
TEMPERATURE RANGE
Operating temperature and humidity:
• Ambient temperature: 32°F to 95°F
(0°C to 35°C)
•
Relative humidity (RH): 10% to 90%
Storage and transport temperature:
• –4°F to 140°F (–20°C to 60°C) at RH 10% to 90%
(non-condensing)
SX20 CODEC DIMENSIONS
• Width: 300 mm / 11.8 in.
• Height: 34 mm / 1.4 in.
• Depth: 180 mm / 7.1 in.
• Weight: 1.4 kg / 3.1 lb
Technical specification (page 2 of 3)
To Next Page
Loading...
